Advance Search
LIU Yuedong LIN Jian YANG Jianwei JIANG Pengfei, . Rapid excavation and supporting technology of ultra-thick top coal roadway based on excavation and bolting integration[J]. COAL SCIENCE AND TECHNOLOGY, 2017, (10).
Citation: LIU Yuedong LIN Jian YANG Jianwei JIANG Pengfei, . Rapid excavation and supporting technology of ultra-thick top coal roadway based on excavation and bolting integration[J]. COAL SCIENCE AND TECHNOLOGY, 2017, (10).

Rapid excavation and supporting technology of ultra-thick top coal roadway based on excavation and bolting integration

More Information
  • Available Online: April 02, 2023
  • Published Date: October 24, 2017
  • In order to realize the rapid excavation of bolter miner in ultra-thick top coal roadway, theoretical calculation and numerical simulation are used to resear ch the stress, displacement under different driving speeds. Based on the structural characteristics of the bolter miner, the support system of the roof and sidewall bolt n ot in a row is presented; by improving the supporting materials, optimizing the operation process, the driving speed has been improved. The research results show that t he position of the peak support pressure in front of the roadway is close to the head, the peak stress increases, and the range of the lateral stress zone and the displac ement of the surrounding coal and rock mass area are correspondingly reduced.The supporting system reduces the overlap of the roof and the sidewall stress in a certa in extent, but achieves the timely support of the sidewall. When the bolter miner was used, the average daily footage increased to 14m/d, while the labour intensity of w orkers reduced, which could provide a good reference for the application of rapid excavation in ultrathick coal seam.
  • Related Articles

    [1]JIA Housheng, HUANG Dongshan, FANG Zhenzhu, LI Dongfa, CHANG Lining, WANG Guoying. Process optimization and application of bolter miner for “three-soft” thick coal seam mining roadway[J]. COAL SCIENCE AND TECHNOLOGY, 2024, 52(8): 1-10. DOI: 10.12438/cst.2023-1530
    [2]TONG Bi, CHEN Jianben, SUN Tao. Key technology and application of small-sized full-section boring machine for rapid construction[J]. COAL SCIENCE AND TECHNOLOGY, 2023, 51(4): 185-197. DOI: 10.13199/j.cnki.cst.2021-0942
    [3]GAO Shigang, CHEN Sushe, CHAI Jing, YANG Yuyu, DU Wengang. Study on optimization of supporting technology for large cross-section open-off cut under contiguous gob[J]. COAL SCIENCE AND TECHNOLOGY, 2021, 49(12): 20-28.
    [4]LIU Chang, JIANG Pengfei, WANG Ziyue, WEI Yaozhong, LUO Chao, GUO Jihchang. Research on current situation of rapid driving technology in coalroadway and its assessment method of application effect[J]. COAL SCIENCE AND TECHNOLOGY, 2020, 48(11): 26-33.
    [5]QIN Shaofeng, WANG Ruoyi. Study on gas drilling technology and supporting technology forL-type horizontal well in Panhe Block[J]. COAL SCIENCE AND TECHNOLOGY, 2019, (9).
    [6]LI Gang, NIU Lei, LI Wenlong. Study on rapid excavation technology for hard rock roadway in coal mine[J]. COAL SCIENCE AND TECHNOLOGY, 2018, (11).
    [7]Li Ajun. Research and application of four-in-one rock drift rapid excavation technology based on drilling and blasting method[J]. COAL SCIENCE AND TECHNOLOGY, 2017, (7).
    [8]Xiao Tongqiang Li Huamin Tu Xingzi Guo Chunsheng Li Haiyang, . Study on five-in-one rapid excavation technology of rock roadway with fully-mechanized method[J]. COAL SCIENCE AND TECHNOLOGY, 2016, (12).
    [9]MA Qi-hua WANG Peng FAN Wen-chang, . Rapid Heading Technology of Mine Hard Rock Large Cross Section Roadway in Deep Mine[J]. COAL SCIENCE AND TECHNOLOGY, 2014, (4).
    [10]Rapid Wet Shotcreting Support Technology of Mine Rock Roadway[J]. COAL SCIENCE AND TECHNOLOGY, 2013, (4).
  • Cited by

    Periodical cited type(9)

    1. 李炜,刘耕,葛云峰,张占荣,黄国良. 基于深度学习的钻孔图像岩体结构面识别. 应用基础与工程科学学报. 2024(03): 702-720 .
    2. 刘大锰,王子豪,陈佳明,邱峰,朱凯,高羚杰,周柯宇,许少博,孙逢瑞. 基于ResNet残差神经网络识别的深部煤层显微组分和微裂缝分类——以鄂尔多斯盆地石炭系本溪组8~#煤层为例. 石油与天然气地质. 2024(06): 1524-1536 .
    3. 季菁菁,奚峥皓,李忠峰. 基于深度迁移学习的煤岩显微组分识别算法. 智能计算机与应用. 2023(02): 92-97+102 .
    4. 王小令,王绍清,陈昊,赵云刚,沙吉顿,李慷. 不同镜惰比低阶煤的结构特征及其热解行为. 煤炭科学技术. 2023(05): 294-301 . 本站查看
    5. 束振宇,徐祥,魏迎春,王安民,王路,刘志飞,陈高建,曹代勇. 不同类型接触变质煤大分子结构差异性研究. 煤炭科学技术. 2023(06): 147-157 . 本站查看
    6. 马羊,马笑. 矿浆pH对煤岩显微组浮选分离效果的影响. 洁净煤技术. 2023(S1): 24-27 .
    7. 袁懿琳,赵荣焕,何坤,黄秀,王洪栋,邹亮. 基于随机森林和树突网络的煤镜质组反射率估计. 工矿自动化. 2023(08): 148-155 .
    8. 张倩如,王云飞,吕帅朝,宋磊,尚钰莹,宋怀波. 基于改进GhostNet的小麦秸秆表皮结构完整性分类方法. 南京农业大学学报. 2022(04): 788-798 .
    9. 曾烃详,刘岩,文志刚,樊云鹏,冯兴强,季长军,史旭凯,高变变,武远哲. 基于迁移学习的全岩光片有机显微组分识别与定量——以皖泾地1井下三叠统殷坑组烃源岩为例. 科学技术与工程. 2022(35): 15485-15493 .

    Other cited types(3)

Catalog

    Article views (1059) PDF downloads (519) Cited by(12)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return