Citation: | WANG Guofa,DU Yibo,XU Yajun,et al. Development and innovation practice of China coal mining technology and equipment for 50 years: Commemorate the 50th anniversary of the publication of Coal Science and Technology[J]. Coal Science and Technology,2023,51(1):1−18. DOI: 10.13199/j.cnki.cst.2022-1801 |
The paper reviewed the development of Coal Science and Technology in the past 50 years which promoted and witnessed the progress and innovation practice of the coal mining technology and equipment in China. Furthermore, the innovation process from coal mine mechanization to coal mine intelligence was expounded and the research and development of coal machine equipment technology which supports the reform of coal development process was analyzed emphatically. Finally, the paper summarized the iterative development of smart coal mine and put forward some ideas for future development trends. Coal mining technology has experienced four major technological changes from blasting mining, ordinary mechanized mining, comprehensive mechanized mining, intelligent mining, through continuous independent research and development and innovation, to achieve great progress in coal productivity. Research and development of coal machinery equipment supports the reform of coal development technology. Hydraulic support is the core of fully mechanized mining. The innovation of supporting theory, design method, frame structure and manufacturing technology supported the breakthrough of hydraulic support products from low-end to high-end. Significant progress has been made in the short board technology for coal mining machines such as manufacturing process, model adaptability, monitoring system and so on. The full series of coal mining machines from 0.8 to 9 m could meet the requirements of efficient production of Chinese coal mines, and the intelligent level was constantly improving. The key technologies of large volume and long distance working face scraper conveyor were constantly broken through. The 450 m ultra-long working face scraper conveyor with large volume runs reliably. The intelligent frequency conversion integrated machine drives instead of traditional CST and other drives, saving energy by nearly 30%. Innovations such as permanent magnet direct drive, arylon belt, and belt conveyor without foundation for large volume belt conveyor showed significant advantages in energy saving, reliability, and intelligence. Electro-hydraulic control and unmanned intelligent mining control technology develop rapidly, and the domestic SAC hydraulic support electro-hydraulic control system, SAM face automation system and SAP intelligent liquid supply system were widely used. To solve the problem of mining imbalance, it had developed the “driving and anchor machine + anchoring and breaking + large-span reloading” intellectualized driving and anchor machine, boom-type roadheader + temporary support system and TBM full face hard rock tunneling system. Intelligent frequency conversion energy-saving transmission supports energy saving in mines, comprehensive domestic innovation of coal machinery equipment and rapid improvement of intelligent manufacturing capacity. More than 30 kinds of coal mine robots had been developed and applied in NingTiaoTa coal mine of Shaanxi coal, achieving good results. The intelligent technology of coal mine developed rapidly and iteratively. This paper analyzed the classification and correlation of coal mine data flow, proposed the overall technical framework of smart coal mine and the basic data processing theory of “hierarchical extraction- association analysis-virtual-real mapping”, summarized the coupling and iterative development progress of smart coal mine system and the construction progress of smart coal mine technical standard system, and finally puts forward the development idea of intelligent coal mine. It is necessary to build a data value ecology based on “coal intelligence cloud”, push forward the research and development of intelligent mining technology and equipment under complex conditions and coal mine robot cluster. Furth more a coal mine intelligence ecology that integrates system intelligence and human wisdom should be built, which could boost the high-quality development of enterprises.
[1] |
王国法,张铁岗,王成山,等. 基于新一代信息技术的能源与矿业治理体系发展战略研究[J]. 中国工程科学,2022,24(1):176−189.
WANG Guofa,ZHANG Tiegang,WANG Chengshan,et al. Development of energy and mining governance system based on new-generation information technology[J]. Engineering,2022,24(1):176−189.
|
[2] |
钱鸣高,许家林. 煤炭开采与岩层运动[J]. 煤炭学报,2019,44(4):973−984.
QIAN Minggao,XU Jialin. Behaviors of strata movement in coal mining[J]. Journal of China Coal Society,2019,44(4):973−984.
|
[3] |
宋振骐,郝 建,石永奎,等. “实用矿山压力控制理论”的内涵及发展综述[J]. 山东科技大学学报(自然科学版),2019,38(1):1−15.
SONG Zhenqi,HAO Jian,SHI Yongkui,et al. An overview of connotation and development of practical ground pressure control theory[J]. Journal of Shan Dong University of Science and Technology (Natural Science),2019,38(1):1−15.
|
[4] |
王国法. 煤矿智能化最新技术进展与问题探讨[J]. 煤炭科学技术,2022,50(1):1−27.
WANG Guofa. New technological progress of coal mine intelligence and its problems[J]. Coal Science and Technology,2022,50(1):1−27.
|
[5] |
王国法,庞义辉. 特厚煤层大采高综采综放适应性评价和技术原理[J]. 煤炭学报,2018,43(1):33−42.
WANG Guofa,PANG Yihui. Full-mechanized coal mining and caving mining method evaluation and key technology for thick coal seam[J]. Journal of China Coal Society,2018,43(1):33−42.
|
[6] |
李首滨,李 森,张守祥,等. 综采工作面智能感知与智能控制关键技术与应用[J]. 煤炭科学技术,2021,49(4):28−39.
LI Shoubin,LI Sen,ZHANG Shouxiang,et al. Key technology and application of intelligent perception and intelligent control in fully mechanized mining face[J]. Coal Science and Technology,2021,49(4):28−39.
|
[7] |
王国法, 史元伟, 陈忠恕, 等. 液压支架技术[M]. 北京: 煤炭工业出版社, 1999: 3.
WANG Guofa, SHI Yuanwei, CHEN Zhongshu, et al. Hydraulic support technology[M]. Beijing: China Coal Industry Publishing House, 1999: 3.
|
[8] |
王国法. 综采工作面成套技术的发展与创新[C]//第七次煤炭科学技术大会文集, 北京: 煤炭工业出版社, 2011: 765-774.
WANG Guofa. Development and innovation of complete set technology in fully mechanized mining face[C]//Collected Papers of the Seventh Coal Science and Technology Conference, Beijing: Coal Industry Press, 2011: 765-774.
|
[9] |
王国法. 煤矿综采自动化成套技术与装备创新和发展[J]. 煤炭科学技术,2013,41(11):1−9.
WANG Guofa. Innovation and development on automatic completed set technology and equipment of fully-mechanized coal mining face[J]. Coal Science and Technology,2013,41(11):1−9.
|
[10] |
王国法,庞义辉. 液压支架与围岩耦合关系与应用[J]. 煤炭学报,2015,40(1):30−34.
WANG Guofa,PANG Yihui. Relationship between hydraulic support and surrounding rock coupling and its application[J]. Journal of China Coal Society,2015,40(1):30−34.
|
[11] |
王国法. 工作面支护与液压支架技术理论体系[J]. 煤炭学报,2014,39(8):1593−1601.
WANG Guofa. Theory system of working face support system and hydraulic roof support technology[J]. Journal of China Coal Society,2014,39(8):1593−1601.
|
[12] |
徐亚军,王国法,任怀伟. 液压支架与围岩刚度耦合理论与应用[J]. 煤炭学报,2015,40(11):2528−2533.
XU Yajun,WANG Guofa,REN Huaiwei. Theory of coupling relationship between surrounding rocks and powered support[J]. Journal oF China Coal Society,2015,40(11):2528−2533.
|
[13] |
徐亚军. 液压支架顶梁外载作用位置理论研究与应用[J]. 煤炭科学技术,2015(7):102−106.
XU Yajun. Research and application external load position of powered support’s canopy[J]. Coal Science and Technology,2015(7):102−106.
|
[14] |
徐亚军,王国法,刘业献. 两柱掩护式液压支架承载特性及其适应性研究[J]. 煤炭学报,2016,41(8):2113−2120.
XU Yajun,WANG Guofa,LIU Yaxian. Supporting property and adaptability of 2-leg powered support[J]. Journal of China Coal Society,2016,41(8):2113−2120.
|
[15] |
王国法,徐亚军,李丁一. 大倾角综采工作面液压支架刚柔组合倾覆力矩平衡的支护原理及其应用[J]. 岩石力学与工程学报,2018,37(S2):4125−4132.
WANG Guofa,XU Yajun,LI Dingyi. Analysis on supporting principle and its application of powered support in large inclined fully mechanized face based on balance of rigid and flexible combined overturning moment[J]. Chinese Journal of Rock Mechanics and Engineering,2018,37(S2):4125−4132.
|
[16] |
徐亚军,王国法. 液压支架群组支护原理与承载特性[J]. 岩石力学与工程学报,2017,36(S1):3367−3373.
XU Yajun,WANG Guofa. Supporting principle and bearing characteristics of hydraulic powered roof support groups[J]. Chinese Journal of Rock Mechanics and Engineering,2017,36(S1):3367−3373.
|
[17] |
徐亚军,王国法,张金虎,等. 基于弹性独立支座的大采高综采工作面液压支架群组支护应力场理论与应用[J]. 岩石力学与工程学报,2018,37(5):1226−1236.
XU Yajun,WANG Guofa,ZHANG Jinhu,et al. Theory and application of supporting stress fields of hydraulic powered support groups in fully mechanized mining face with large mining height based on elastic supporting beam model[J]. Chinese Journal of Rock Mechanics and Engineering,2018,37(5):1226−1236.
|
[18] |
王国法,张金虎,徐亚军,等. 深井厚煤层长工作面支护应力特性及分区协同控制技术[J]. 煤炭学报,2021,46(3):763−773.
WANG Guofa,ZHANG Jinhu,XU Yajun,et al. Supporting stress characteristics and zonal cooperative control technology of long working face in deep thick coal seam[J]. Journal of China Coal Society,2021,46(3):763−773.
|
[19] |
徐亚军,王国法,柴宾元,等. 液压支架虚拟样机构建技术的研究[J]. 煤矿开采,2003(4):8−11.
XU Yajun,WANG Guofa,CHAI Binyuan,et al. Study on Virtual Prototype Technology in Hydraulic Powered Support[J]. Coal Mining Technology,2003(4):8−11.
|
[20] |
孟宪云,李提建,徐亚军. 应用反向动力学实现液压支架的三维虚拟仿真[J]. 煤矿开采,2009,14(3):78−80.
MENG Xianyun,LI Tijian,XU Yajun. Applying IK solvers to realizing 3D Virtual simulation of powered support t[J]. Coal Mining Technology,2009,14(3):78−80.
|
[21] |
王国法, 徐亚军, 孙守山. 液压支架三维建模及其运动仿真[J]. 煤炭科学技术, 2003, 29(1): 42-46.
WANG Guofa, XU Yajun, SUN Shoushan. 3 D modeling of hydraulic powered support and dynamic simulation[J]. Coal Science and Technology, 2003, 29(1): 42-46.
|
[22] |
王秀海,王国法,徐亚军,等. WH70高强钢采用高强度焊丝Q550常温下焊接试验[J]. 煤矿机械,2003(4):23−26.
|
[23] |
徐亚军,黄书祥,刘成峰,等. Q890高强度结构钢在液压支架应用的试验研究[J]. 煤矿开采,2016,21(1):46−48.
XU Yajun,HUANG Shuxiang,LIU Chengfeng,et al. Experimental Research on Q890 high strength structural steel application in hydraulic support[J]. Coal Mining Technology,2016,21(1):46−48.
|
[24] |
王安顺,徐亚军,刘士卫,等. 高温富水强矿压环境液压支架研究与设计[J]. 煤矿机械,2021,42(2):24−26.
WANG Anshun,XU Yajun,LIU Shiwei,et al. Research and design of hydraulic support in high temperature rich water and strong mine pressure environment[J]. Coal Mine Machinery,2021,42(2):24−26.
|
[25] |
杜博睿,王淼辉,申博文. 液压支架立柱激光熔覆不锈钢的组织与性能[J]. 热加工工艺,2021,50(16):4.
DU Borui,WANG Miaohui,SHEN Bowen. Microstructure and properties of laser cladding stainless steel on hydraulic support cylinder[J]. Hot Working Technology,2021,50(16):4.
|
[26] |
王昆宏,刘鸣放. 支架高端制造立柱内壁熔铜技术的研究与应用[J]. 内燃机与配件,2018,14(2):114−115.
WANG Kunhong,LIU Mingfang. Research and application of molten copper technology in the inner wall of high-end manufacturing column of bracket[J]. Internal Combustion Engine & Parts,2018,14(2):114−115.
|
[27] |
汪连成. 刮板成套输送设备发展现状与展望[J]. 煤矿机电,2021,42(6):16−19.
WANG Liancheng. Development status and prospect of complete scraper conveyor equipment[J]. Colliery Mechanical & Electrical Technology,2021,42(6):16−19.
|
[28] |
蒋卫良,刘 冰,郗存根. 煤矿主煤流运输系统技术现状及发展趋势[J]. 智能矿山,2022,3(6):62−70.
JIANG Weiliang,LIU Bing,XI Cungen. Technical status and development trend of main coal flow transportation system in coal mines[J]. Intelligent Transportation,2022,3(6):62−70.
|
[29] |
李首滨. 智能化开采研究进展与发展趋势[J]. 煤炭科学技术,2019,47(10):102−110.
LI Shoubin. Progress and development trend of intelligent mining technology[J]. Coal Science and Technology,2019,47(10):102−110.
|
[30] |
李 森. 基于惯性导航的工作面直线度测控与定位技术[J]. 煤炭科学技术,2019,47(8):169−174.
LI Sen. Measurement & control and localisation for fully-mechanized working face alignment based on inertial navigation[J]. Coal Science and Technology,2019,47(8):169−174.
|
[31] |
任怀伟. 液压支架机器人智能焊接生产线研发与应用[J]. 煤炭科学技术,2017,45(5):16−21.
REN Huaiwei. Development and application of robot intelligent welding production line to hydraulic powered support[J]. Coal Science and Technology,2017,45(5):16−21.
|
[32] |
杜毅博,任怀伟,陈士松,等. 液压支架智能焊接车间制造执行系统研究与应用[J]. 煤炭科学技术,2017,45(10):117−122.
DU Yibo,REN Huaiwei,CHEN Shisong,et al. Development and application of manufacturing execute system for hydraulic support intelligent welding workshop[J]. Coal Science and Technology,2017,45(10):117−122.
|
[33] |
王国法,任怀伟,赵国瑞,等. 智能化煤矿数据模型及复杂巨系统耦合技术体系[J]. 煤炭学报,2022,47(1):61−74.
WANG Guofa,REN Huaiwei,ZHAO Guorui,et al. Digital foundation and giant system coupling technology system of smart coal mine[J]. Journal of China Coal Society,2022,47(1):61−74.
|
[34] |
任怀伟,王国法,赵国瑞,等. 智慧煤矿信息逻辑模型及开采系统决策控制方法[J]. 煤炭学报,2019,44(9):2923−2935.
REN Huaiwei,WANG Guofa,ZHAO Guorui,et al. Smart coal mine logic model and decision control method of mining system[J]. Journal of China Coal Society,2019,44(9):2923−2935.
|
[35] |
王国法,杜毅博,任怀伟,等. 智能化煤矿顶层设计研究与实践[J]. 煤炭学报,2020,45(6):1909−1924.
WANG Guofa,DU Yibo,REN Huaiwei,et al. Top level design and practice of smart coal mines[J]. Journal of China Coal Society,2020,45(6):1909−1924.
|
[36] |
王国法,杜毅博. 智慧煤矿与智能化开采技术的发展方向[J]. 煤炭科学技术,2019,47(1):1−10.
WANG Guofa,DU Yibo. Development direction of intelligent coal mine and intelligent mining technology[J]. Coal Science and Technology,2019,47(1):1−10.
|
[37] |
吴群英,蒋 林,王国法,等. 智慧矿山顶层架构设计及其关键技术[J]. 煤炭科学技术,2020,48(7):80−91.
WU Qunying,JIANG Lin,WANG Guofa,et al. Top-level architecture design and key technologies of smart mine[J]. Coal Science and Technology,2020,48(7):80−91.
|
[38] |
韩 安,陈晓晶,贺耀宜,等. 智能矿山综合管控平台建设构思[J]. 工矿自动化,2021,47(8):7−14.
HAN An,CHEN Xiaojing,HE Yaoyi,et al. Construction conception of intelligent management and control platform[J]. Industry and Mine Automation,2021,47(8):7−14.
|
[39] |
程德强, 钱建生, 郭星歌, 等. 煤矿安全生产视频AI识别关键技术研究综述[J/OL]. 煤炭科学技术: 1-17[2023-01-12]. DOI: 10.13199/j.cnki.cst.2022-0359.
CHENG Deqiang, QIAN Jiansheng, GUO Xingge, et al. Review on key technologies of AI recognition for videos in coal mine[J/OL]. Coal Science and Technology, 1-17[2023-01-12]. DOI: 10.13199/j.cnki.cst.2022-0359.
|
[40] |
王国法,杜毅博. 煤矿智能化标准体系框架与建设思路[J]. 煤炭科学技术,2020,48(1):1−9.
WANG Guofa,DU Yibo. Development direction of intelligent coal mine and intelligent mining technology[J]. Coal Science and Technology,2020,48(1):1−9.
|