Advance Search
ZHOU Lidong, HAN Liangliang, MENG Wenjun, WANG Lei, CAO Xueqin, CHEN Xianghui. Experimental study on temperature characteristics of indentation rolling resistance of belt conveyor[J]. COAL SCIENCE AND TECHNOLOGY, 2021, 49(3): 123-128. DOI: 10.13199/j.cnki.cst.2021.03.016
Citation: ZHOU Lidong, HAN Liangliang, MENG Wenjun, WANG Lei, CAO Xueqin, CHEN Xianghui. Experimental study on temperature characteristics of indentation rolling resistance of belt conveyor[J]. COAL SCIENCE AND TECHNOLOGY, 2021, 49(3): 123-128. DOI: 10.13199/j.cnki.cst.2021.03.016

Experimental study on temperature characteristics of indentation rolling resistance of belt conveyor

More Information
  • Available Online: April 02, 2023
  • Published Date: March 24, 2021
  • In order to study the influence of temperature on the indentation rolling resistance of the belt conveyor, the method of rolling resistance test at different temperatures in the laboratory was carried out, and the data collected were processed and fitted with curves,and the curves of indentation rolling resistance and indentation rolling resistance coefficient of the belt conveyor at different temperatures were obtained.The test results show that under the condition of constant load and belt speed, when the ambient temperature is less than 0 ℃, the indentation rolling resistance and indentation rolling resistance coefficient increases with the rise of temperature; when the ambient temperature is within the range of 0 ℃ to 25 ℃, the indentation rolling resistance and indentation rolling resistance coefficient decreases with the increase of temperature; When the ambient temperature is greater than 25 ℃, the indentation rolling resistance and indentation rolling resistance coefficient increases with the rise of temperature. Secondly, when the temperature and load are constant, the indentation rolling resistance increases with the increase of the belt speed; when the temperature and the belt speed are constant, the indentation rolling resistance increases with the increase of load.
  • Related Articles

    [1]ZHANG Lang, LIU Yanqing. Research on technology of key steps of intelligent ventilation in mines[J]. COAL SCIENCE AND TECHNOLOGY, 2024, 52(1): 178-195. DOI: 10.12438/cst.2023-1987
    [2]SU Wei, JIANG Chunlu, ZHA Junzhen, ZHENG Liugen, XIE Huadong, HUANG Wendi, CHEN Yuanping. Identification of mine water inrush source based on objective combinedweights-improved set pair analysis model[J]. COAL SCIENCE AND TECHNOLOGY, 2022, 50(4): 156-164.
    [3]MAO Jun, CHEN Hongyan, MA Ying, LI Yuzhu, CHEN Hongyue. Analysis of solid-thermal-mechanical coupling characteristics of shearer smooth boots[J]. COAL SCIENCE AND TECHNOLOGY, 2020, 48(1).
    [4]LIU Yufeng, MA Ming. Study on prediction method for sliding distance of soil slope bedding creeping in open pit mine[J]. COAL SCIENCE AND TECHNOLOGY, 2019, (11).
    [5]CHEN Xuefeng, MIAO Yongchun, CHEN Wentao. Study on evaluation of mine floor water inrush danger based on Fuzzy Set Pair Analysis Method[J]. COAL SCIENCE AND TECHNOLOGY, 2019, (2).
    [6]Chen Hongyue Zhang Kun Tian Song Mao Jun Song Qiushuang, . Analysis on modeling and service life of pin row guide sliding shoes set on shearer under oblique cutting performances[J]. COAL SCIENCE AND TECHNOLOGY, 2017, (4).
    [7]ZHANG Yan-zhao ;. Calculation on Fitting Degree of Coalbed Methane Well Gas Production Based on Set Pair Analysis Principle[J]. COAL SCIENCE AND TECHNOLOGY, 2014, (10).

Catalog

    Article views (213) PDF downloads (282) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return