| Citation: |
LI Zibo，ZHANG Guohua，LI Yubo，et al. Evolution process and lateral pressure distribution of gangue side in roof cutting entry retaining[J]. Coal Science and Technology，2024，52（8）：23−35. DOI: 10.12438/cst.2024-0613
|
The success of gangue support in roof cutting and retaining roadway depends on the evolution process of gangue side and its lateral pressure distribution. Based on the engineering background of Xinghua Coal Mine, this paper analyzes the mechanical characteristics of gangue compaction, the roof caving process, and the gangue side evolution process through indoor experiments and similar simulations. The mechanical model is established through theoretical analysis, and the impact of different factors on the lateral pressure of the gangue side is analyzed. The numerical simulation gives the distribution law of the overburden pressure and the lateral pressure of the gangue side at the boundary of the goaf and gives the gangue side support scheme from the perspective of gangue side lateral pressure influencing factors. The research results show that : ①The lateral pressure of the gangue side is related to the evolution process of the gangue in the goaf. In the self-organizing adjustment stage of the gangue, the lateral pressure of the gangue side is mainly generated by the self-weight of the gangue, and the lateral pressure depends on the accumulated height. In the passive compaction stage of gangue, the gangue body is repeatedly compacted under periodic roof pressure, and the lateral pressure of the gangue side gradually increases. In the stable stage of gangue, the gangue body is compacted at this stage, which plays an obvious supporting role in the overburdened rock. The stable value of the overburden pressure is 3.81 MPa, and the stable value of the gangue side lateral pressure is 2.12 MPa. ②From the position of the roof of the roadway to the position of the floor, the lateral pressure of the gangue side gradually increases. ③From the perspective of the external environment, the lateral pressure of the gangue side has a significant positive correlation with the roof overburden pressure and a significant negative correlation with the roof cutting angle. From the perspective of the gangue’s mechanical properties, the gangue side’s lateral pressure and the gangue’s internal friction angle show a significant positive correlation. Consequently, the “bag + net + u-shaped steel + inclined support monomer” gangue retaining support scheme is proposed, and the field application effect is good. This study may provide a reference for similar engineering conditions of gangue support.
| [1] |
何满潮,谢和平,彭苏萍,等. 深部开采岩体力学研究[J]. 岩石力学与工程学报,2005,24(16):2803−2813. doi: 10.3321/j.issn:1000-6915.2005.16.001
HE Manchao,XIE Heping,PENG Suping,et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(16):2803−2813. doi: 10.3321/j.issn:1000-6915.2005.16.001
|
| [2] |
康红普,张晓,王东攀,等. 无煤柱开采围岩控制技术及应用[J]. 煤炭学报,2022,47(1):16−44.
KANG Hongpu,ZHANG Xiao,WANG Dongpan,et al. Strata control technology and applications of non-pillar coal mining[J]. Journal of China Coal Society,2022,47(1):16−44.
|
| [3] |
宋振骐,崔增娣,夏洪春,等. 无煤柱矸石充填绿色安全高效开采模式及其工程理论基础研究[J]. 煤炭学报,2010,35(5):705−710.
SONG Zhenqi,CUI Zengdi,XIA Hongchun,et al. The fundemental theoretial and engineering research on the green safe no coal pillar mining model by mainly using coal gangue backfill[J]. Journal of China Coal Society,2010,35(5):705−710.
|
| [4] |
康红普,牛多龙,张镇,等. 深部沿空留巷围岩变形特征与支护技术[J]. 岩石力学与工程学报,2010,29(10):1977−1987.
KANG Hongpu,NIU Duolong,ZHANG Zhen,et al. Deformation characteristics of surrounding rock and supporting technology of gob-side entry retaining in deep coal mine[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(10):1977−1987.
|
| [5] |
华心祝,杨朋. 深井大断面沿空留巷底板变形动态演化特征研究[J]. 中国矿业大学学报,2018,47(3):494−501.
HUA Xinzhu,YANG Peng. Floor deformation dynamic evolution of gob-side entry retaining with large section in deep mine[J]. Journal of China University of Mining & Technology,2018,47(3):494−501.
|
| [6] |
张国华. 主动支护下沿空留巷顶板破碎原因分析[J]. 煤炭学报,2005,30(4):429−432. doi: 10.3321/j.issn:0253-9993.2005.04.005
ZHANG Guohua. Roof cracking reason analysis about gob-side entry retaining under initiative support[J]. Journal of China Coal Society,2005,30(4):429−432. doi: 10.3321/j.issn:0253-9993.2005.04.005
|
| [7] |
何满潮,宋振骐,王安,等. 长壁开采切顶短壁梁理论及其110工法:第三次矿业科学技术变革[J]. 煤炭科技,2017(1):1−9,13. doi: 10.3969/j.issn.1008-3731.2017.01.001
HE Manchao,SONG Zhenqi,WANG An,et al. Theory of longwall mining by using roof cuting shortwall team and 110 method: the third mining science and technology reform[J]. Coal Science & Technology Magazine,2017(1):1−9,13. doi: 10.3969/j.issn.1008-3731.2017.01.001
|
| [8] |
何满潮,陈上元,郭志飚,等. 切顶卸压沿空留巷围岩结构控制及其工程应用[J]. 中国矿业大学学报,2017,46(5):959−969.
HE Manchao,CHEN Shangyuan,GUO Zhibiao,et al. Control of surrounding rock structure for gob-side entry retaining by cutting roof to release pressure and its engineering application[J]. Journal of China University of Mining & Technology,2017,46(5):959−969.
|
| [9] |
袁超峰,袁永,朱成,等. 薄直接顶大采高综采工作面切顶留巷合理参数研究[J]. 煤炭学报,2019,44(7):1981−1990.
YUAN Chaofeng,YUAN Yong,ZHU Cheng,et al. Reasonable parameters of roof cutting entry retaining in thin immediate roof and large mining height fully-mechanized face[J]. Journal of China Coal Society,2019,44(7):1981−1990.
|
| [10] |
陈上元,赵波,袁越,等. 城郊矿深部工作面切顶留巷工程试验研究[J]. 采矿与安全工程学报,2021,38(1):121−129.
CHEN Shangyuan,ZHAO Bo,YUAN Yue,et al. Engineering experiment on gob-side entry retaining by roof cutting of deep mining face in Chengjiao coalmine[J]. Journal of Mining & Safety Engineering,2021,38(1):121−129.
|
| [11] |
许旭辉,何富连,吕凯,等. 厚层坚硬顶板切顶留巷合理切顶参数[J]. 煤炭学报,2023,48(8):3048−3059.
XU Xuhui,HE Fulian,LYU Kai,et al. Research on reasonable cutting roof parameters of gob side entry retaining by roof cutting in thick and hard roof[J]. Journal of China Coal Society,2023,48(8):3048−3059.
|
| [12] |
郭金刚,李耀晖,石松豪,等. 厚硬基本顶切顶卸压成巷及围岩控制技术[J]. 煤炭学报,2021,46(9):2853−2864.
GUO Jingang,LI Yaohui,SHI Songhao,et al. Self-forming roadway of roof cutting and surrounding rock control technology under thick and hard basic roof[J]. Journal of the China Coal Society,2021,46(9):2853−2864.
|
| [13] |
张国锋,刘寄婷,常爱苹,等. 东保卫矿倾斜煤层厚硬顶板沿空切顶成巷关键参数研究[J]. 矿业研究与开发,2021,41(6):111−116.
ZHANG Guofeng,LIU Jiting,CHANG Aiping,et al. Study on key parameters of gob-side entry retaining by cutting thick and hard roof in inclined coal seam of Dongbaowei coal mine[J]. Mining Research and Development,2021,41(6):111−116.
|
| [14] |
马资敏,郭志飚,刘晓宇,等. 切顶留巷冒落矸石碎胀规律与力学特性研究[J]. 煤炭工程,2017,49(11):94−98.
MA Zimin,GUO Zhibiao,LIU Xiaoyu,et al. Study on bulking rule and mechanical characteristics of fallen gangue in roof-cutting entry retaining[J]. Coal Engineering,2017,49(11):94−98.
|
| [15] |
宋天奇,朱磊,刘成勇,等. 采动过程中覆岩破碎区碎胀性走向分布特征[J]. 科学技术与工程,2023,23(23):9881−9887. doi: 10.12404/j.issn.1671-1815.2023.23.23.09881
SONG Tianqi,ZHU Lei,LIU Chengyong,et al. Distribution characteristics of dilatancy in overburden fracture zone during mining[J]. Science Technology and Engineering,2023,23(23):9881−9887. doi: 10.12404/j.issn.1671-1815.2023.23.23.09881
|
| [16] |
蒋力帅,武泉森,李小裕,等. 采动应力与采空区压实承载耦合分析方法研究[J]. 煤炭学报,2017,42(8):1951−1959.
JIANG Lishuai,WU Quansen,LI Xiaoyu,et al. Numerical simulation on coupling method between mining-induced stress and goaf compression[J]. Journal of China Coal Society,2017,42(8):1951−1959.
|
| [17] |
王海龙,王琦,赵振华,等. 采空区冒落矸石承压变形特征及侧向压力分布规律研究[J]. 煤炭科学技术,2023,51(6):20−29.
WANG Hailong,WANG Qi,ZHAO Zhenhua,et al. Study on bearing deformation characteristics and lateral pressure distribution law of caved gangue in gob[J]. Coal Science and Technology,2023,51(6):20−29.
|
| [18] |
马新根,何满潮,张良,等. 切顶成巷采空区冒落矸石碎胀系数及侧向压力测定研究[J]. 煤炭工程,2019,51(2):37−41.
MA Xingen,HE Manchao,ZHANG Liang,et al. Determination about bulk increase coefficient and lateral pressure of caving gangue in gob-side entry retaining formed by roof cutting[J]. Coal Engineering,2019,51(2):37−41.
|
| [19] |
SALAMON M D G. Mechanism of caving in longwall coal mining[M]. Boca Raton:CRC Press,2020:161-168.
|
| [20] |
LI W F,BAI J B,PENG S,et al. Numerical modeling for yield pillar design:a case study[J]. Rock Mechanics and Rock Engineering,2015,48(1):305−318. doi: 10.1007/s00603-013-0539-8
|
| [21] |
ZHANG G C,HE F L,JIA H G,et al. Analysis of gateroad stability in relation to yield pillar size:a case study[J]. Rock Mechanics and Rock Engineering,2017,50(5):1263−1278. doi: 10.1007/s00603-016-1155-1
|
| [22] |
窦林名,阚吉亮,李许伟,等. 断顶爆破防治冲击矿压技术体系及效果评价研究[J]. 煤炭科学技术,2020,48(1):24−32.
DOU Linming,KAN Jiliang,LI Xuwei,et al. Study on prevention technology of rock burst by break-tip blasting and its effect estimation[J]. Coal Science and Technology,2020,48(1):24−32.
|
| 1. |
孙亚清. 矿区废弃地生态修复技术研究. 能源与环保. 2025(02): 75-80 .
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: