Citation: | JIA Housheng,ZHANG Zhiming,LIU Shaowei,et al. Research on dissimilation characteristics and control method of failure of surrounding rock in the roadway with repeated mining of steep and ultra-close multiple coal seam[J]. Coal Science and Technology,2025,53(2):68−80. DOI: 10.12438/cst.2024-0263 |
During the process of mining of the steep and ultra-close multiple coal seam groups, the roadway is affected by multiple mining, the regional stress environment is complex, the deformation and failure of the roadway is severe and the non-uniform characteristics are significant, and the support and maintenance are difficult. For such problems, taking the repeated mining roadway of the and ultra-close multiple steep coal seam 31233 transportation lane of Daichiba as the engineering background, the comprehensive research methods such as theoretical analysis, numerical simulation and field experiment are adopted to find out the evolution characteristics of surrounding rock stress environment at different locations of the roadway and the dis-similatory failure law of roadway surrounding rock under its influence, the special-shaped section which is beneficial to the convergence of plastic failure distribution of surrounding rock is designed, and the design method of non-uniform bolt ( cable ) support based on the alienation distribution law of plastic zone of roadway surrounding rock is proposed. The results show that under the influence of repeated mining of the steep and ultra-close multiple coal seam, the bidirectional principal stress around the roadway has a large difference, and the direction of the principal stress is deflected accordingly, resulting in the butterfly-shaped alienation characteristics of the surrounding rock of the roadway, such as non-uniformity and deflection of the maximum failure depth. The stagger position and cross-section shape of the roadway determine the failure form and scope of the roadway, and the stagger distancet directly affects the dissimilation distribution and scope of the plastic zone of the surrounding rock, and the existence of hard rock causes local annihilation of the plastic zone. When the position of the roadway is staggered to more than 17 m, the stress environment around the roadway tends to be stable, and there is no obvious change in the plastic size and shape of its surrounding rock. The internal dislocation position is greater than the distance, which is most favorable for the stability of the surrounding rock of the roadway. The unilateral span size of the roadway section determines the depth of plastic failure on its side. When the roadway section is a polygonal special-shaped section, the convergence degree of plastic distribution of surrounding rock is significant. In the design of roadway section, the longest side of roadway should be located on the side of hard rock stratum and try to avoid the direction of maximum failure depth, so as to make full use of the annihilation characteristics of plastic zone of hard rock stratum and avoid the excessive expansion of butterfly leaves in plastic zone of roadway surrounding rock. Therefore, the geometric characteristics of the section of the special-shaped roadway with the condition of steep coal seam can be fully utilized. Based on the dissimilation distribution law of the plastic zone of the surrounding rock of the roadway and the distribution characteristics of the reasonable anchorage layer, the non-uniform bolt (anchor cable ) support design can be carried out, which can effectively guarantee the support force of the bolt (anchor cable ) and ensure the overall stability of the surrounding rock of the roadway. At the same time, the industrial test was carried out in 31233 headentry. Before the influence of severe mining, the monitoring station of deep displacement of roadway roof and anchor cable support force was set up. During the monitoring period, the total deformation of roof deformation was controlled within 100 mm, the anchor cable support force was stable, and the overall control effect of surrounding rock was better.
[1] |
王家臣,杨胜利,刘淑琴,等. 急倾斜煤层开采技术现状与流态化开采构想[J]. 煤炭科学技术,2022,50(1):48−59.
WANG Jiachen,YANG Shengli,LIU Shuqin,et al. Technology status and fluidized mining conception for steeply inclined coal seams[J]. Coal Science and Technology,2022,50(1):48−59.
|
[2] |
伍永平,贠东风,解盘石,等. 大倾角煤层长壁综采:进展、实践、科学问题[J]. 煤炭学报,2020,45(1):24−34.
WU Yongping,YUN Dongfeng,XIE Panshi,et al. Progress,practice and scientific issues in steeply dipping coal seams fully-mechanized mining[J]. Journal of China Coal Society,2020,45(1):24−34.
|
[3] |
ZHANG J W,WANG J C,WEI W J,et al. Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining[J]. Arabian Journal of Geosciences,2018,11(5):96. doi: 10.1007/s12517-018-3421-x
|
[4] |
程志恒,齐庆新,李宏艳,等. 近距离煤层群叠加开采采动应力-裂隙动态演化特征实验研究[J]. 煤炭学报,2016,41(2):367−375.
CHENG Zhiheng,QI Qingxin,LI Hongyan,et al. Evolution of the superimposed mining induced stress-fissure field under extracting of close distance coal seam group[J]. Journal of China Coal Society,2016,41(2):367−375.
|
[5] |
张勇,张春雷,赵甫. 近距离煤层群开采底板不同分区采动裂隙动态演化规律[J]. 煤炭学报,2015,40(4):786−792.
ZHANG Yong,ZHANG Chunlei,ZHAO Fu. Dynamic evolution rules of mining-induced fractures in different floor area of short-distance coal seams[J]. Journal of China Coal Society,2015,40(4):786−792.
|
[6] |
范明建,康红普,林健,等. 埋深1300 m大倾角复合岩层巷道围岩综合控制技术研究[J]. 采矿与安全工程学报,2015,32(5):706−713.
FAN Mingjian,KANG Hongpu,LIN Jian,et al. Study on comprehensive control technology of roadway surroundings with large-dip angle compound strata in coal mine with depth of 1 300 m[J]. Journal of Mining & Safety Engineering,2015,32(5):706−713.
|
[7] |
康红普,徐刚,王彪谋,等. 我国煤炭开采与岩层控制技术发展40a及展望[J]. 采矿与岩层控制工程学报,2019,1(2):7−39.
KANG Hongpu,XU Gang,WANG Biaomou,et al. Forty years development and prospects of underground coal mining and strata control technologies in China[J]. Journal of Mining and Strata Control Engineering,2019,1(2):7−39.
|
[8] |
康红普,姜鹏飞,高富强,等. 掘进工作面围岩稳定性分析及快速成巷技术途径[J]. 煤炭学报,2021,46(7):2023−2045.
KANG Hongpu,JIANG Pengfei,GAO Fuqiang,et al. Analysis on stability of rock surrounding heading faces and technical approaches for rapid heading[J]. Journal of China Coal Society,2021,46(7):2023−2045.
|
[9] |
伍永平,解盘石,贠东风,等. 大倾角层状采动煤岩体重力−倾角效应与岩层控制[J]. 煤炭学报,2023,48(1):100−113.
WU Yongping,XIE Panshi,YUN Dongfeng,et al. Gravity-dip effect and strata control in mining of the steeply dipping coal seam[J]. Journal of China Coal Society,2023,48(1):100−113.
|
[10] |
张艳丽,解盘石,伍永平. 急倾斜煤层重复采动回采巷道变形破坏机理与支护技术研究[J]. 煤炭工程,2020,52(2):91−95.
ZHANG Yanli,XIE Panshi,WU Yongping. Deformation-failure mechanism and the support technology of mining roadway under repeated mining in steeply inclined coal seam[J]. Coal Engineering,2020,52(2):91−95.
|
[11] |
罗生虎,王同,伍永平,等. 大倾角煤层群长壁开采承载拱与间隔岩层采动应力演化特征[J]. 煤炭学报,2023,48(2):551−562.
LUO Shenghu,WANG Tong,WU Yongping,et al. Evolution characteristics of mining stress of bearing arch and interval strata in longwall mining of steeply dipping coal seam groups[J]. Journal of China Coal Society,2023,48(2):551−562.
|
[12] |
罗生虎,王同,伍永平,等. 大倾角煤层长壁开采围岩应力传递路径时空演化特征[J]. 煤炭学报,2022,47(7):2534−2545.
LUO Shenghu,WANG Tong,WU Yongping,et al. Space-time evolution characteristics of stress transfer path of surrounding rock in longwall mining of steeply dipping seam[J]. Journal of China Coal Society,2022,47(7):2534−2545.
|
[13] |
LUO S H,WANG T,WU Y P,et al. Experiment on space-time evolution characteristics of deformation and failure of overlying strata in longwall mining of steeply dipping coal seam[J]. Energy Exploration & Exploitation,2023,41(2):656−676.
|
[14] |
冯国瑞,郝晨良,王朋飞,等. 近距采空区下回采巷道非对称变形机理及控制对策[J]. 中国矿业大学学报,2022,51(4):617−631.
FENG Guorui,HAO Chenliang,WANG Pengfei,et al. Asymmetric deformation mechanism and control measures for mining roadway under gob in close proximity[J]. Journal of China University of Mining & Technology,2022,51(4):617−631.
|
[15] |
ZHANG X T,HU S Y,HAO Y X,et al. Effect of coal fine retention on the permeability of hydraulic propped fracture[J]. Rock Mechanics and Rock Engineering,2022,55(10):6001−6014. doi: 10.1007/s00603-022-02933-5
|
[16] |
FENG G R,WANG P F,CHUGH Y P. Stability of gate roads next to an irregular yield pillar:A case study[J]. Rock Mechanics and Rock Engineering,2019,52(8):2741−2760. doi: 10.1007/s00603-018-1533-y
|
[17] |
LI Z,YU S C,ZHU W B,et al. Dynamic loading induced by the instability of voussoir beam structure during mining below the slope[J]. International Journal of Rock Mechanics and Mining Sciences,2020,132:104343. doi: 10.1016/j.ijrmms.2020.104343
|
[18] |
张进鹏,刘立民,刘传孝,等. 深部大倾角煤岩层巷道断面形状与耦合支护[J]. 中南大学学报(自然科学版),2021,52(11):4074−4087.
ZHANG Jinpeng,LIU Limin,LIU Chuanxiao,et al. Cross-section shape and coupling support of deep and large inclined coal and rock roadway[J]. Journal of Central South University (Science and Technology),2021,52(11):4074−4087.
|
[19] |
张进鹏,刘立民,刘传孝,等. 松软厚煤层异型开切眼新型预应力锚注支护研究与应用[J]. 煤炭学报,2021,46(10):3127−3138.
ZHANG Jinpeng,LIU Limin,LIU Chuanxiao,et al. Research and application of new prestressed anchor-grouting support for special open-off cut in soft-thick coal seam[J]. Journal of China Coal Society,2021,46(10):3127−3138.
|
[20] |
张进鹏,刘立民,刘传孝,等. 基于预应力锚和自应力注的破碎围岩锚注加固应用研究[J]. 采矿与安全工程学报,2021,38(4):774−783.
ZHANG Jinpeng,LIU Limin,LIU Chuanxiao,et al. Application of bolt-grouting reinforcement for broken surrounding rock based on prestressed bolt and self-stress grouting[J]. Journal of Mining & Safety Engineering,2021,38(4):774−783.
|
[21] |
赵志强,马念杰,郭晓菲,等. 大变形回采巷道蝶叶型冒顶机理与控制[J]. 煤炭学报,2016,41(12):2932−2939.
ZHAO Zhiqiang,MA Nianjie,GUO Xiaofei,et al. Falling principle and support design of butterfly-failure roof in large deformation mining roadways[J]. Journal of China Coal Society,2016,41(12):2932−2939.
|
[22] |
赵志强,马念杰,刘洪涛,等. 巷道蝶形破坏理论及其应用前景[J]. 中国矿业大学学报,2018,47(5):969−978.
ZHAO Zhiqiang,MA Nianjie,LIU Hongtao,et al. A butterfly failure theory of rock mass around roadway and its application prospect[J]. Journal of China University of Mining & Technology,2018,47(5):969−978.
|
[23] |
JIA H S,WANG Y W,LIU S W,et al. Development and testing of a tool to create multiple conical reamed cable bolt anchorages in weak rock[J]. Rock Mechanics and Rock Engineering,2022,55(12):7887−7897. doi: 10.1007/s00603-022-03044-x
|
[24] |
郭晓菲,郭林峰,马念杰,等. 巷道围岩蝶形破坏理论的适用性分析[J]. 中国矿业大学学报,2020,49(4):646−653,660.
GUO Xiaofei,GUO Linfeng,MA Nianjie,et al. Applicability analysis of the roadway butterfly failure theory[J]. Journal of China University of Mining & Technology,2020,49(4):646−653,660.
|
[25] |
贾后省,马念杰,朱乾坤. 巷道顶板蝶叶塑性区穿透致冒机理与控制方法[J]. 煤炭学报,2016,41(6):1384−1392.
JIA (Hou)(Sheng| Xing),MA Nianjie,ZHU Qiankun. Mechanism and control method of roof fall resulted from butterfly plastic zone penetration[J]. Journal of China Coal Society,2016,41(6):1384−1392.
|
[26] |
贾后省,潘坤,刘少伟,等. 采动巷道复合顶板离层破坏机理与预测方法[J]. 采矿与安全工程学报,2021,38(3):518−527.
JIA Housheng,PAN Kun,LIU Shaowei,et al. Mechanism and prediction method of rock layer separation failure of composite roof in mining roadway[J]. Journal of Mining & Safety Engineering,2021,38(3):518−527.
|
[27] |
王卫军,范磊,马谕杰,等. 基于蝶形破坏理论的深部巷道围岩控制技术研究[J]. 煤炭科学技术,2023,51(1):157−167.
WANG Weijun,FAN Lei,MA Yujie,et al. Research on surrounding rock control technology of deep roadway based on butterfly failure theory[J]. Coal Science and Technology,2023,51(1):157−167.
|
[28] |
JIA H S,WANG Y W,LIU S W,et al. Experimental study on double cuneiform reamed anchorages for cable bolt boreholes in soft rock[J]. International Journal of Rock Mechanics and Mining Sciences,2022,158:105198. doi: 10.1016/j.ijrmms.2022.105198
|
[29] |
曹树刚,王帅,王寿全,等. 大倾角煤层回采巷道断面适应性[J]. 东北大学学报(自然科学版),2017,38(3):436−441.
CAO Shugang,WANG Shuai,WANG Shouquan,et al. Adaptability of roadway section shape in deep inclined seam[J]. Journal of Northeastern University (Natural Science),2017,38(3):436−441.
|
[30] |
贾后省,赵希栋,董阳阳,等. 采动影响巷道顶板辅助材料支护设计方法研究[J]. 煤矿开采,2013(6):53−56.
JIA Housheng,ZHAO Xidong,DONG Yangyang,et al. Design method of ancillary material supporting roadway influenced by mining[J]. Coal Mining Technology,2013(6):53−56.
|