| Citation: |
SHU Longyong，RAO Wenming，FAN Xisheng，et al. Development and application of sample preparation and shear test system for soft crushed coal[J]. Coal Science and Technology，2024，52（2）：126−134. DOI: 10.12438/cst.2023-1240
|
The study of mechanical properties of soft crushed coal is of great significance for roadway support and prediction of coal and gas outburst, but there is a lack of effective equipment for sampling, sample preparation and mechanical properties analysis of soft crushed coal. Therefore, a set of sample preparation and shear test system for soft crushed coal was developed, which was mainly composed of sampling device, sample preparation device and mechanical property parameter test system. The main functions and characteristics of each part was as following. ① The single-action three-tube coring device in the sampling device was comprised of 3 parts of head assembly, outer tube assembly and inner tube assembly. A stability ring was arranged between the inner and outer tube to ensure that the inner tube and the outer tube were concentric. A liner was arranged inside the inner tube assembly cavity to store coal cores, and the inner tube does not rotate with the outer tube during coring and drilling. When the drilled coal core was full of liner, then the coring device was withdrawn. The liner was disassembled and taken out, and the coal cores and liner were taken out and packaged together. The sampling device was flexible, portable and easy to disassemble and carry. ② The sample preparation device was comprised of 4 prats of stripping instrument, cutting machine, refrigerator and hot fan. The stripping instrument was used to strip the outer lining pipe of coal core. Cutting machine, refrigerator and hot fan was used to cut, freeze and heat shrink coal core. The production of the standard coal core sample is divided into 3 steps of punching and wetting, freezing and cutting, heat shrinking and stripping. Adopting the technology of partial freezing and cutting at the end, and synchronizing the demolding and heat shrinkage uniformly to achieve the sample preparation with various standard size, with perfect sample making method and high success rate. ③ The mechanical property parameter test system was comprised of 3 parts of main structure servo oil source control device and software system, which can realize restrictive and non-restrictive straight shear test function. It was mainly used to carry out straight shear test under different normal stress and triaxial compression test under different confining pressure of soft crushed coal standard specimen. The overall design structure was simple and convenient to operate. A single action three-tube corer was used to obtain soft crushed coal, and a sample preparation device such as a demolding instrument was used to prepare them into standard specimen in this study. Then the straight shear test and triaxial compression test of soft crushed coal standard specimen by using the mechanical property parameter test system were conducted under normal stress of 0.04, 0.05, 0.06, 0.07, 0.08, 0.09 MPa and confining pressure of 0.2, 0.3, 0.4 MPa, respectively. The shear strength parameters such as cohesion and internal friction angle of soft crushed coal was obtained under the two test conditions. The cohesion and internal friction angle obtained from straight shear test were 0.125 kPa and 37.2°, and those obtained from triaxial compression test were 0.121 kPa and 36.4°, respectively. The results show that the system has great practicability and reliability, and provides a better test platform and method for studying the mechanical characteristics of soft crushed coal.
| [1] |
袁 亮,王恩元,马衍坤,等. 我国煤岩动力灾害研究进展及面临的科技难题[J]. 煤炭学报,2023,48(5):1825−1845.
YUAN Liang,WANG Enyuan,MA Yankun,et al. Research progress of coal and rock dynamic disasters and scientific and technological problems in China[J]. Journal of China Coal Society,2023,48(5):1825−1845.
|
| [2] |
周 鹏,张 博. 极松软煤层抗剪强度的水敏性试验研究[J]. 煤炭科学技术,2017,45(5):103−108.
ZHOU Peng,ZHANG Bo. Experimental study on water sensitivity of shear strength of extremely soft coal seam[J]. Coal Science and Technology,2017,45(5):103−108.
|
| [3] |
舒龙勇,朱南南,陈 结,等. 煤与瓦斯突出危险精准辨识理论方法与技术探索[J]. 煤炭学报,2020,45(5):1614−1625.
SHU Longyong,ZHU Nannan,CHEN Jie,et al. Theoretical method and technology of precision identification for coaland gas outburst hazard[J]. Journal of China Coal Society,2020,45(5):1614−1625.
|
| [4] |
舒龙勇,王 凯,齐庆新,等. 煤与瓦斯突出关键结构体致灾机制[J]. 岩石力学与工程学报,2017,36(2):347−356.
SHU Longyong,WANG Kai,QI Qingxin,et al. Key structural body theory of coal and gas outburst[J]. Chinese Journal of Rock Mechanics and Engineering,2017,36(2):347−356.
|
| [5] |
宫伟东,张瑞林,郭晓洁,等. 构造煤原煤样制作及渗透性试验研究[J]. 煤炭科学技术,2017,45(3):89−93,122.
GONG Weidong,ZHANG Ruilin,GUO Xiaojie,et al. Experiment study on raw coal sample preparation and permeability of structure coal[J]. Coal Science and Technology,2017,45(3):89−93,122.
|
| [6] |
刘耀宁. 构造煤井下探测的激电特征研究[D]. 徐州:中国矿业大学,2020.
LIU Yaoning. Study on induced polarization characteristics of tectonically deformed coal under coal mine[D]. Xuzhou:China University of Mining and Technology,2020.
|
| [7] |
陈功胜. 煤岩地层绳索取芯装备研发及应用实践[J]. 中国安全生产科学技术,2013,9(12):102−106. doi: 10.11731/j.issn.1673-193x.2013.12.017
CHEN Gongsheng. Development and practice application of rope coring equipment in coal and rock seam[J]. Journal of Safety Science and Technology,2013,9(12):102−106. doi: 10.11731/j.issn.1673-193x.2013.12.017
|
| [8] |
王法凯. 测定煤层瓦斯含量的冰冻取样方法研究[D]. 重庆:重庆大学,2019.
WANG Fakai. Study on the method of freezing sampling for measuring gas content in coal seam[D]. Chongqing:Chongqing University,2019.
|
| [9] |
刘清泉. 多重应力路径下双重孔隙煤体损伤扩容及渗透性演化机制与应用[D]. 徐州:中国矿业大学,2016.
LIU Qingquan. Damage and permeability evolution mechanism of dual-porosity coal under multiple stress paths and its application[D]. Xuzhou:China University of Mining and Technology,2016.
|
| [10] |
PAPADIMITRIOU AG,DAFALIAS YF,YOSHIMINE M,et al. Plasticity modeling of the effect of sample preparation method on sand response[J]. Soils and Foundations,2005,45(2):109−123. doi: 10.3208/sandf.45.2_109
|
| [11] |
SIVAKUMAR V,WHEELER SJ,SIVAKUMAR V,et al. Influence of compaction procedure on the mechanical behaviour of an unsaturated compacted clay - Part 1:wetting and isotropic compression[J]. Geotechnique,2000,50(4):359−368. doi: 10.1680/geot.2000.50.4.359
|
| [12] |
KENAI S,BAHAR R,BENAZZOUG M,et al. Experimental analysis of the effect of some compaction methods on mechanical properties and durability of cement stabilized soil[J]. Journal of Materials Science,2006,41(21):6956−6964. doi: 10.1007/s10853-006-0226-1
|
| [13] |
苟学登. 盾构区间软土力学试验及沉降机理研究[J]. 中国水运,2023,23(6):119−121.
GOU Xuedeng. Mechanical test and settlement mechanism study of soft soil in shield zone[J]. China Water Transport,2023,23(6):119−121.
|
| [14] |
郭 莹,王跃新. 原状与重塑粉土固结不排水剪切特性的对比试验[J]. 水利学报,2011,42(1):68−75.
GUO Ying,WANG Yuexin. Comparative test of undrained shear properties of consolidated silt between undisturbed and remolded soils[J]. Journal of Hydraulic Engineering,2011,42(1):68−75.
|
| [15] |
孙德安,高 游. 不同制样方法非饱和土的持水特性研究[J]. 岩土工程学报,2015,37(1):91−97. doi: 10.11779/CJGE201501010
SUN Dean,GAO You. Water retention behaviour of soils with different preparations[J]. Journal of Geotechnical Engineering,2015,37(1):91−97. doi: 10.11779/CJGE201501010
|
| [16] |
BHAUMIK L,RUTHERFORD C J,OLSON S M,et al. A multidirectional cyclic direct simple shear device for characterizing dynamic soil behavior[J]. Geotechnical Testing Journal,2023,46(2):213−253. doi: 10.1520/GTJ20210286
|
| [17] |
RUTHERFORD C J,BISCONTIN G. Development of a multidirectional simple shear testing device[J]. Geotechnical Testing Journal,2013,36(6):858−866. doi: 10.1520/GTJ20120173
|
| [18] |
LIU Yixin ,XU Jiang,YIN Guangzhi,et al. Development of a new direct shear testing device for investigating rock failure[J]. Rock Mechanics and Rock Engineering,2017,50(3):647−651.
|
| [19] |
许 江,彭守建,尹光志,等. 含瓦斯煤岩细观剪切试验装置的研制及应用[J]. 岩石力学与工程学报,2011,30(4):677−685.
XU Jiang,PENG Shoujian,YIN Guangzhi,et al. Development and application of a mesoscopic shear test device for coal-rock containing gas[J]. Chinese Journal of Rock Mechanics and Engineering,2011,30(4):677−685.
|
| [20] |
张建经,马东华,曾鹏毅,等. 新型便携式钻孔剪切仪研发与测试分析[J]. 重庆交通大学学报(自然科学版),2019,38(11):90−97. doi: 10.3969/j.issn.1674-0696.2019.11.15
ZHANG Jianjing,MA Donghua,ZENG Pengyi,et al. Development and test analysis of a new portable borehole shear equipment[J]. Journal of Chongqing Jiaotong University (Natural Science),2019,38(11):90−97. doi: 10.3969/j.issn.1674-0696.2019.11.15
|
| [21] |
DING Yongming,PENG Shoujian,GUO Hui. Experimental research on shear performance of coal containing gas under different gas pressure[J]. Applied Mechanics and Materials,2012,170:209−213. doi: 10.4028/www.scientific.net/AMM.170-173.209
|
| [22] |
吴蔚律,刘光生,郭利杰,等. 基于直剪试验的胶结充填体与岩石接触面力学特性研究[J]. 中国矿业,2019,28(12):116−122,127. doi: 10.12075/j.issn.1004-4051.2019.12.008
WU Weilv,LIU Guangsheng,GUO Lijie,et al. Experimental investigation on interface mechanical properties between cemented paste backfill and rock based on direct shear tests[J]. China Mining Magazine,2019,28(12):116−122,127. doi: 10.12075/j.issn.1004-4051.2019.12.008
|
| [23] |
运 凯,朱永全,郭小龙,等. 基于三轴试验的泥岩力学特性及强度准则研究[J]. 铁道工程学报,2023,40(5):8−15. doi: 10.3969/j.issn.1006-2106.2023.05.002
YUN Kai,ZHU Yongquan,GUO Xiaolong,et al. Research on the mechanical properties and strength criteria of mudstone based on triaxial test[J]. Journal of Railway Engineering Society,2023,40(5):8−15. doi: 10.3969/j.issn.1006-2106.2023.05.002
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: