| Citation: |
LIU Shaowei，LI Xiaopeng，ZHU Wenqing，et al. Roof cutting mechanism of dense drilling in gob-side entry retaining and determination method of key parameters[J]. Coal Science and Technology，2024，52（2）：23−33. DOI: 10.12438/cst.2023-1760
|
To achieve the safe and stable structural condition of the roof along the goaf under the roof cutting by dense drilling method, the stress distribution and fracture process of the roof strata between normal and dense drilling conditions were studied. Based on rock fracture theory and elastic theory, the stress distribution of the surrounding rock between dense drilling and the fracture process were analyzed before and after mining, clarifying the cutting mechanism of dense drilling and the interaction mechanism of concentrated stress between adjacent drilling. The calculation formula for the tensile-shear stress of the surrounding rock between dense drilling in the arc-shaped triangular panel structure at the end of the working face was derived. Based on this, the influence of different parameters on the tensile-shear stress of the surrounding rock between drilling was analyzed, and a determination method for the key parameters of roof cutting by dense drilling holes along the goaf was proposed. Research has shown that the dense drilling mainly increases the concentration of the surrounding rock's tensile and shear stress by changing the stress conditions around the densely drilled holes before and after mining, causing the expansion and connection of fractures between drilling and forming key rock layers for cutting. Before mining, the drill holes are mainly affected by horizontal compression stress, and after mining, the stress gradually changes to the tensile and shear stress caused by the rotation and subsidence of the goaf roof, and the state of the surrounding rock between the holes transitions from the weakening stage to the formation of crack stage, and then to the fracture stage. The magnitude of the tensile and shear stress of the surrounding rock between the densely drilled holes mainly depends on the thickness of the key rock layer and the ratio of the hole diameter to the hole spacing, and is negatively correlated with the hole height and spacing, and positively correlated with the angle and diameter of the drill holes. Based on this, a method for determining the key parameters of intensive drilling and cutting is proposed, and a plan for intensive drilling and cutting in the goaf with hard roof conditions on the 3124 N working face of Longtan Mine is designed, with a hole length of 8.3 m, an angle of 15°, a hole diameter of 48 mm, and a spacing of 500 mm. The deformation of the goaf roof after cutting is controllable and the overall stability is good, which proves that the arrangement parameters of intensive drilling and cutting are reasonable, and the determination method for the key parameters of roof cutting by dense drilling holes is effective and feasible.
| [1] |
陈 勇,柏建彪,朱涛垒,等. 沿空留巷巷旁支护体作用机制及工程应用[J]. 岩土力学,2012,33(5):1427−1432.
CHEN Yong,BAI Jianbiao,ZHU Taolei,et al. Mechanisms of roadside support in gob-side entry retaining and its application[J]. Rock and Soil Mechanics,2012,33(5):1427−1432.
|
| [2] |
何满潮,陈上元,郭志飚,等. 切顶卸压沿空留巷围岩结构控制及其工程应用[J]. 中国矿业大学学报,2017,46(5):959−969.
HE Manchao,CHEN Shangyuan,GUO Zhibiao,et al. Control of surrounding rock structure for gob-side entry retaining bycutting roof to release pressure and its engineering application[J]. Journal of China University of Mining & Technology,2017,46( 5):959−969.
|
| [3] |
何满潮,高玉兵,杨 军,等. 无煤柱自成巷聚能切缝技术及其对围岩应力演化的影响研究[J]. 岩石力学与工程学报,2017,36(6):1314−1325.
HE Manchao,GAO Yubing,YANG Jun,et al. An energy-gathered roof cutting technique in no-pillar mining and its impact on stress variation in surrounding rocks[J]. Chinese Journal of Rock Mechanics and Engineering,2017,36(6):1314−1325.
|
| [4] |
李小鹏,刘少伟,付孟雄,等. 密集钻孔切顶卸压关键参数影响因素研究及应用[J]. 煤炭科学技术,2023,51(12):243−253.
LI Xiaopeng,LIU Shaowei,FU Mengxiong,et al. Research and application of influencing factors of key parameters of roof cutting and pressure relief by Dense Drilling[J]. Coal Science and Technology,2023,51(12):243−253.
|
| [5] |
齐庆新,李一哲,赵善坤,等. 我国煤矿冲击地压发展70年:理论与技术体系的建立与思考[J]. 煤炭科学技术,2019,47(9):1−40.
QI Qingxin,LI Yizhe,ZHAO Shankun,et al. Seventy years development of coal mine rockburst in China:establishment and consideration of theory and technology system[J]. Coal Science and Technology,2019,47(9):1−40.
|
| [6] |
LIU Jiangwei,LIU Changyou,YAO Qiangling. Mechanisms of crack initiation and propagation in dense linear multihole directional hydraulic fracturing[J]. Shock and Vibration,2019,2019:1−16.
|
| [7] |
李东印,张景轩,郑立军,等. 密集钻孔弱化底分层顶板沿空留巷技术[J]. 煤矿安全,2022,53(7):111−118,125.
LI Dongyin,ZHANG Jingxuan,ZHENG Lijun,et al. Dense boreholes for weakening bottom layer by cutting roof and pressure relief of gob-side entry retaining[J]. Safety in Coal Mines,2022,53(7):111−118.
|
| [8] |
周府伟. 三软煤层超前钻孔弱化引导切顶留巷技术研究[D]. 西安:西安科技大学,2019:27–32.
ZHOU Fuwei. Research on the technique of guiding gob-side entry formed by advanced roof caving with weaking bore in three-soft coal seam[D]. Xi'an: Xi'an University of Science and Technology,2019:27–32.
|
| [9] |
MA Junqiang,LI Xuehua,YAO Qiangling,et al. Numerical simulation on mechanisms of dense drilling for weakening roofs and its application in roof control[J]. Journal of Central South University,2023,30(6):1865−1886. doi: 10.1007/s11771-023-5345-1
|
| [10] |
回新冬. 区段窄煤柱承载演化特征及稳定性控制[D]. 徐州:中国矿业大学,2021:55–57.
HUI Xindong. Bearing evolution characteristics and stability control of narrow coal pillar in section[D]. Xuzhou:China University of Mining and Technology,2021:55–57.
|
| [11] |
申 乾. 密集钻孔切顶卸压机理及应用[D]. 徐州:中国矿业大学,2020:46–48.
SHEN Qian. Mechanism and application of pressure relief for roof cutting with dense drilling[D]. Xuzhou:China University of Mining and Technology,2020:46–48.
|
| [12] |
姚强岭,王夫榕,马守龙,等. 正断层区段异形煤柱护巷矿压显现特征及控制[J]. 采矿与安全工程学报,2022,39(6):1095−1107.
YAO Qiangling,WANG Furong,MA Shoulong,et al. Characteris-tics and control of strong underground pressure appear under irreg-ular section normal fault roadway pillar[J]. Journal of Mining & Safety Engineering,2022,39(6):1095−1107.
|
| [13] |
赵 毅,解洪鑫,姚强岭. 宋新庄煤矿顶板密集钻孔切顶卸压护巷技术研究[J]. 煤炭工程,2023,55(5):45−51.
ZHAO Yi,XIE Hongxin,YAO Qiangling. Roof cutting and pressure relief with dense drilling for roadway protection in Songxinzhuang Coal Mine[J]. Coal Engineering,2023,55(5):45−51.
|
| [14] |
孙延斌,宋厚武,彭向锋. 沿断层异形区段煤柱密集钻孔卸压护巷技术研究[J]. 煤炭工程,2023,55(3):36−40.
SUN Yanbin,SONG Houwu,PENG Xiangfeng. Dense drilling pressure relief in irregular district pillar along fault[J]. Coal Engineering,2023,55(3):36−40.
|
| [15] |
杨 强. 滨湖煤矿16207材料巷密集钻孔切顶留巷原理及应用[D]. 徐州:中国矿业大学,2021:44–45.
YANG Qiang. Principle and application of dense borehole cutting roof and retaining roadway in,16207 material roadway of Binhu Coal Mine[D]. Xuzhou:China University of Mining and Technology,2021:44–45.
|
| [16] |
XIA Ze,YAO Qiangling,GUOSHENG Meng,et al. Numerical study of stability of mining roadways with 6.0-m section coal pillars under influence of repeated mining[J]. International Journal of Rock Mechanics and Mining Sciences,2021,138:104641. doi: 10.1016/j.ijrmms.2021.104641
|
| [17] |
朱卫兵,于 斌,鞠金峰,等. 采场顶板关键层“横U–Y”型周期破断特征的试验研究[J]. 煤炭科学技术,2020,48(2):36−43.
ZHU Weibing,YU Bin,JU Jinfeng,et al. Experimental study on horizontal“U–Y”periodical breakagecharacteristics of key strata in stope roof[J]. Coal Science and Technology,2020,48(2):36−43.
|
| [18] |
杨敬轩,刘长友,于 斌,等. 工作面端头三角区沿空巷道强矿压显现与应力转移分析[J]. 采矿与安全工程学报,2016,33(1):88−95.
YANG Jingxuan,LIU Changyou,YU Bin,et al. An analysis on strong strata behaviors and stress transfer of the roadway approaching gob in triangle area of the face end[J]. Journal of Mining & Safety Engineering,2016,33(1):88−95.
|
| [19] |
高晓将. 综放工作面端头区稳定性研究[D]. 北京:北方工业大学,2016:58–60.
GAO Xiaojiang. Stability study in the end zone of mining face of full-mechanized caving[D]. Beijing: North China University of Technology,2016:58–60.
|
| [20] |
马斌文,邓志刚,赵善坤,等. 钻孔卸压防治冲击地压机理及影响因素分析[J]. 煤炭科学技术,2020,48(5):35−40.
MA Binwen,DENG Zhigang,ZHAO Shankun,et al. Analysis on the mechanism and influencing factors of drillingpressure relief to prevent rock burst[J]. Coal Science and Technology,2020,48(5):35−40.
|
| [21] |
钱鸣高,石平五. 矿山压力与岩层控制[M]. 北京:中国矿业大学出版社,2010.
|
| [22] |
陈祥东. 坚硬顶板沿空切顶成巷试验与顶板结构变形演化机理研究[D]. 包头:内蒙古科技大学,2022:77–78.
CHENG Xiangdong. Study on field test of gob-side entry retaining by roof cutting with hard roof and deformation evolution mechanism of roof structure[D]. Baotou: Inner Mongolia University of Science and Technology,2022:77–78.
|
| [23] |
杨胜利,王家臣,李良晖. 基于中厚板理论的关键岩层变形及破断特征研究[J]. 煤炭学报,2020,45(8):2718−2727.
YANG Shengli,WANG Jiachen,LI Lianghui. Analysis of deformation and fracture characteristics of key strata based onthe medium thick plate theory[J]. Journal of China Coal Society,2020,45(8):2718−2727.
|
| [24] |
郭文兵,韩明振,杨伟强,等. 弱胶结地层重复采动条件下地表最大沉降模型研究及应用[J]. 煤炭科学技术,2023,51(9):1−10. doi: 10.12438/cst.2022-1814
GUO Wenbing,HAN Mingzhen,YANG Weiqiang,et al. Research and application of maximum surface subsidencemodel under the condition of repeated mining in weakly cemented strata[J]. Coal Science and Technology,2023,51(9):1−10. doi: 10.12438/cst.2022-1814
|
| [25] |
孙晓明,刘 鑫,梁广峰,等. 薄煤层切顶卸压沿空留巷关键参数研究[J]. 岩石力学与工程学报,2014,33(7):1449–1456.
SUN Xiaoming,LIU Xin,LIANG Guangfeng,et al. Study on key parameters of goaf retaining roadway for roof cutting and unloading in thin coal seam[J]. Chinese Journal of Rock Mechanics and Engineering,2014,33(7):1449–1456.
|
| [26] |
张 盛,王小良,吴自强,等. 切顶卸压沿空留巷爆破孔关键参数选择及留巷效果现状分析[J]. 河南理工大学学报(自然科学版),2019,38(6):1−9.
ZHANG Sheng,WANG Xiaoliang,WU Ziqiang,et al. Status analy-sis of the key parameters of blasting borehole and the retaining ef-fect for gob-side entry retaining by the way of roof cutting and pressure releasing[J]. Journal of Henan Polytechnic Universi-ty(Natural Sci-ence),2019,38(6):1−9.
|
| [27] |
邰 阳. 坚硬顶板采场定向造缝覆岩三维破断特征及应力场演化规律[D]. 徐州:中国矿业大学,2021:84–85.
TAI Yang. 3D breaking characteristics of overlying strata and stress field evolution law in stope with directional hard roof cutting[D]. Xuzhou:China University of Mining and Technology,2021:84–85.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: