Advance Search
WANG Zhiming,FENG Hankun,GUAN Kun,et al. SCMC-Bent based borehole sealing hydrogel loss property and its viscosity evolution mechanism for gas extraction[J]. Coal Science and Technology,2024,52(10):103−113. DOI: 10.12438/cst.2024-0796
Citation: WANG Zhiming,FENG Hankun,GUAN Kun,et al. SCMC-Bent based borehole sealing hydrogel loss property and its viscosity evolution mechanism for gas extraction[J]. Coal Science and Technology,2024,52(10):103−113. DOI: 10.12438/cst.2024-0796

SCMC-Bent based borehole sealing hydrogel loss property and its viscosity evolution mechanism for gas extraction

More Information
  • Received Date: June 14, 2024
  • Available Online: September 29, 2024
  • To achieve the effective dynamic sealing of fractures inducing air-leakage around gas extraction borehole and to prevent slurry loss from fractures under negative suction pressure, SCMC-Bent based hydrogel was prepared, which is composed of sodium carboxymethyl cellulose (SCMC), sodium bentonite (Bent) and other additives. Herein, viscosity evolution processes of the SCMC-Bent based hydrogels with different water-material ratios were measured in laboratory. Then, migration and loss properties of the SCMC-Bent based hydrogel in fracture net work of coal grains were studied by the slurry migration experiment under negative suction pressure. Finally, pH evolution of the gel was measured, and micro-structures of SCMC-Bent based hydrogels with different water-material ratios and isolating-standing times were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and X-ray diffraction (XRD), aiming to illuminate the micro mechanism of viscosity evolution. Study results show: ① at a constant temperature, the viscosity of the SCMC-Bent based hydrogel presents the trend of “rise first, and then drop” over time. The higher the water-material ratio, the lower the viscosity of the SCMC-Bent based hydrogel, and the earlier of the time corresponding to the viscosity dropping. ② The higher the water-material ratio, the faster the hydrogel migrating in fracture net, but the earlier the hydrogel loss happening under the negative pressure. Compared to the hydrogels with other water-material ratios, the hydrogel with water-material ratio of 10:1 merely migrates 41 mm after 24 days under negative pressure, indicating that it is more easily to block fractures with air leakage for a long time. ③ The number of montmorillonite layers in the SCMC-Bent based hydrogel increases first and then decreases over time; a new intermediate product, named as SCMC-CXP inserting in the montmorillonite interlayers is existed. With the isolating-standing time lasting, the amount of SCMC-CXP inserted into montmorillonite interlayers increases first and then decreases, and decreases with the increase of water-material ratio. A “sandwich” structure could be formed in the hydrogel, which is composed of the montmorillonite layers and the SCMC-CXP inserted into the montmorillonite interlayers. Further, in the whole SCMC-Bent based hydrogel system, a 3-dimentional net structure forms gradually that is composed of montmorillonite layers, SCMC-CXP inserted into montmorillonite interlayers and other SCMC-CXP outside the montmorillonite interlayers. ④ The 3-dimentional net structure formed is the reason causing the SCMC-Bent based hydrogel viscosity increasing consequently. However, due to the decrease of montmorillonite layer number and the breakage of SCMC-CXP molecules chain over time, the dispersion of the 3-dimentional net structure occurs, inducing the decrease of the viscosity. What’s more, high water-material ratios make the SCMC-CXP insertion amount decrease and weak the interaction of macromolecules, enhancing the water transportation capacity in the hydrogel, and inducing the viscosity becoming lower.

  • [1]
    WANG Zhiming,HURTER Suzanne,YOU Zhenjiang,et al. Influences of negative pressure on air-leakage of coal seam gas extraction:laboratory and CFD-DEM simulations[J]. Journal of Petroleum Science and Engineering,2021,196:107731. doi: 10.1016/j.petrol.2020.107731
    [2]
    张超,范富槐,李树刚,等. 基于微胶囊技术的瓦斯抽采钻孔密封材料研究[J]. 煤炭科学技术,2023,51(4):72−79.

    ZHANG Chao,FAN Fuhuai,LI Shugang,et al. Research on gas drainage borehole sealing material based on microcapsule technology[J]. Coal Science and Technology,2023,51(4):72−79.
    [3]
    王志明,孙玉宁,张硕,等. 竖直恒载循环作用下煤层钻孔失稳演化研究[J]. 岩石力学与工程学报,2020,39(02):262−271.

    WANG Ziming,SUN Yuning,ZHANG Shuo,et al. Study on failure evolution for in-seam borehole by constant vertical stress cyclic loadings[J]. Chinese Journal of Rock Mechanics and Engineering,2020,39(02):262−271.
    [4]
    胡亚超,熊祖强,王春,等. 煤层顶板深孔预裂爆破高效封孔材料及工艺研究[J]. 煤炭科学技术,2023,51(4):30−36.

    HU Yachao,XIONG Zuqiang,WANG Chun,et al. Research on high-efficiency sealing material and technology of coal roof deep-hole pre-splitting blasting[J]. Coal Science and Technology,2023,51(4):30−36.
    [5]
    程健维,赵刚,刘雨涛,等. 瓦斯抽采钻孔非凝固材料性能与智能封孔装置研究[J]. 煤炭科学技术,2020,48(2):131−135.

    CHENG Jianwei,ZHAO Gan,LIU Yutao,et al. Study on the properties of non:solidified materials and intelligent hole sealing device for gas drainage drilling[J]. Coal Science and Technology,2020,48(2):131−135.
    [6]
    RAN Dezhi,CHENG Jianwei,SHENG Shuping,et al. A two-phase particle flow method based on SCLB for enhancing CBM recovery:Experimental testing and engineering applications[J]. 2024,440:119754.
    [7]
    SOARES A S F,MARQUES M R C,CALCADA L A,et al. Interaction of blockers on drilling fluids rheology and its effects on sealing of fractures and prevention of filtrate invasion[J]. Journal of Petroleum Science and Engineering,2018,171:260−270. doi: 10.1016/j.petrol.2018.07.053
    [8]
    SOARES A S F,SOUSA A M F,CALCADA L A,et al. Study of materials to combat loss of circulation in fractures and static filtration[J]. Journal of Petroleum Science and Engineering,2021,200:108401. doi: 10.1016/j.petrol.2021.108401
    [9]
    LIU Wenmeng,WANG Rongrong,LI Jinwang,et al. Effects of different hydrocolloids on gelatinization and gels structure of chestnut starch[J]. Food Hydrocolloids,2021,120:106925. doi: 10.1016/j.foodhyd.2021.106925
    [10]
    MA Zhongtao,LYU Yingchun,YANG Hansheng,et al. Systematic investigation of the Binder's role in the electrochemical performance of tin sulfide electrodes in SIBs[J]. Journal of Power Sources,2018,401:195−203. doi: 10.1016/j.jpowsour.2018.08.081
    [11]
    BENSLIMANE A,BAHLOULI I,BEKKOUR K,et al. Thermal gelation properties of carboxymethyl cellulose and bentonite-carboxymethyl cellulose dispersions:Rheological considerations[J]. Applied Clay Science,2016,132:702−710.
    [12]
    WANG Zhongrong,DING Wantao,ZHU Zhijiang,et al. Experimental study on rheological behaviors of Na-bentonite slurries under seawater intrusion[J]. Construction and Building Materials,2022,357:129369. doi: 10.1016/j.conbuildmat.2022.129369
    [13]
    GONCHARUK V V,DUBROVINA L V,MAKAROVA E V. Effect of self-assembly in water-containing colloid systems with dispersed mineral particles on their structural mechanical characteristics[J]. Journal of Water Chemistry and Technology,2017,39(6):624−623.
    [14]
    STEPHAN K,REINER D,CHRISTIAN W. Evolution of the pH value at the vicinity of the iron-bentonite interface[J]. Applied Clay Science,2021,201:105929. doi: 10.1016/j.clay.2020.105929
    [15]
    NARAYANAN N,GUPATA S,GAJBHIYE V T,et al. Optimization of isotherm models for pesticide sorption on biopolymer-nanoclay composite by error analysis[J]. Chemosphere,2017,173:502−511. doi: 10.1016/j.chemosphere.2017.01.084
    [16]
    GONG Ning,LIU Yanping,HUANG Ruihua. Simultaneous adsorption of Cu2+ and Acid fuchsin (AF) from aqueous solutions by CMC/bentonite composite[J]. International Journal of Biological Macromolecules,2018,115:580−589. doi: 10.1016/j.ijbiomac.2018.04.075
    [17]
    SAIDA B,ASMA C,MERIEM E,et al. Grafting of oxidized carboxymethyl cellulose with hydrogen peroxide in presence of Cu(II) to chitosan and biological elucidation[J]. Biocybernetics and Biomedical Engineering,2017,37(1):94−102. doi: 10.1016/j.bbe.2016.09.003
    [18]
    ZHANG Lingyan,WANG Cuizhen,YANG Rongchao,et al. Novel environment-friendly magnetic bentonite nanomaterials functionalized by carboxymethyl chitosan and 1-(2-pyridinylazo)-2-naphthaleno for adsorption of Sc(III)[J]. Applied Surface Science,2021,566:150644. doi: 10.1016/j.apsusc.2021.150644
    [19]
    HUO N K,AMEER K,WU Z G,et al. Preparation,characterization,structural analysis and antioxidant activities of phosphorylated polysaccharide from Sanchi (Panax not onginseng) flower[J]. Journal of Food Science and Technology,2022,59:4603−4614. doi: 10.1007/s13197-022-05539-5
    [20]
    SARAH H,MAHASIN F,HADI A,et al. Study physical characteristics of Polyvinyl Alcohol/Carboxymethyl cellulose blend films[J]. Kuwait Journal of Science,2023,50(3B):1−14.
    [21]
    GOODARZI A R,FATEH S N,SHEKARY H. Impact of organic pollutants on the macro and microstructure responses of Na-bentonite[J]. Applied Clay Science,2016,121:17−28.
    [22]
    王丽,庞方亮,王爱勤. 羧甲基纤维素钠/蒙脱土纳米复合材料的制备及结构表征[J]. 硅酸盐学报,2010,38(9):1820−1826

    WANG Li,PANG Fangliang,WANG Aiqin. Preparation and Structure Characterization of Sodium Carboxymethylcellulose/Montmorillonite Nanocomposites[J]. Journal of the Chinese Ceramic Society,2010,38(9):1820−1826.
    [23]
    HOSSEINL H,ZIRAKJOU A,MCCLEMENTS D J,et al. Removal of methylene blue from wastewater using ternary nanocomposite aerogel systems:carboxymethyl cellulose grafted by polyacrylic acid and decorated with graphene oxide[J]. Journal of Hazardous Materials,2021,421:126752.
    [24]
    DAS S,OJHA A,MAHTO V,et al. Evaluation of the Xanthan Gum,Gum Acacia,and Their Graft Copolymers with Acrylamide as Low-Dosage Hydrate inhibitors for Their Application in the Drilling of Gas Hydrate Reservoirs[J]. Energy & Fuels,2023,37(11):7728−7745.
    [25]
    GHOSH P,BORAH D,GANGULI J. Synthesis and Characterization of Polymer-Layered Silicate Nanocomposites[J]. Asian Journal of Chemistry,2014,26(16):5275−5278. doi: 10.14233/ajchem.2014.17188
    [26]
    ZHANG Shuo,ZHANG Xiaodong,YANG Yanhui,et al. XRD structure evolution characteristics of tectonic coal under solvent extraction[J]. Spectroscopy and Spectral Analysis,2017,37(10):3220−3224.
    [27]
    ZOU Jin,LONG Xixi,HE Jiale,et al. A sandwich-like CMC-based/graphene/CMC-based conductive agent prepared from needle coke for high-performance LiFePO4 batteries[J]. Carbon Letters,2023,33:2237−2251. doi: 10.1007/s42823-023-00584-2
    [28]
    郭子赫,姜璐莎,王昆,等. 干湿循环作用下聚合物改性膨润土渗透特性研究[J]. 土木工程学报,2023,56(S1):55−63.

    GUO Zihe,JIANG Lusha,WANG Kun,et al. Hydraulic conductivity of polymer-modified bentonite under wet-dry cycles[J]. China Civil Engineering Journal,2023,56(S1):55−63.
    [29]
    ABUJDAYIL B,GHANNAM M. The Modification of Rheological Properties of Sodium Bentonite-water Dispersions with Low Viscosity CMC Polymer Effect[J]. Energy Sources Part A-Recovery Utilization and Environmental Effects,2014,36(10):1037−1048. doi: 10.1080/15567036.2010.551260
    [30]
    CUI Jianxun,VARMA J,EMRICK T,et al. Carboxymethyl cellulose foams:fabrication,aqueous stability,and water capture[J]. Polymers & Biopolymers,2023,58(19):8230−8240.
    [31]
    ARINAITWE E,PAWLIK M. Dilute solution properties of carboxymethyl celluloses of various molecular weights and degrees of substitution[J]. Carbohydrate Polymers,2014,99:423−431. doi: 10.1016/j.carbpol.2013.08.030
    [32]
    GOYAL I,ZAHERI A H M,SRIVASTAVA S,et al. Longitudinal and volume viscosities of fluids confined in nanochannel[J]. Physics and Chemistry of Liquids,2013,51(5):595−605. doi: 10.1080/00319104.2012.760088
  • Related Articles

    [1]GAO Shigang, CHEN Sushe, CHAI Jing, YANG Yuyu, DU Wengang. Study on optimization of supporting technology for large cross-section open-off cut under contiguous gob[J]. COAL SCIENCE AND TECHNOLOGY, 2021, 49(12): 20-28.
    [2]WU Jianxing, FANG Shulin. Mechanical mechanism and control technology of floor heave of high stress thick coal seam under dynamic pressure[J]. COAL SCIENCE AND TECHNOLOGY, 2018, (12).
    [3]WANG Hongzhi, ZHANG Dongsheng, WANG Xufeng, ZHANG Shenglong, CHENG Jixin. Study on bolt-mesh-anchor support technology of open-off cut with compound roof and large cross section[J]. COAL SCIENCE AND TECHNOLOGY, 2018, (4).
    [4]Du Shaohua Yu Weijian Zhang Tianlian Zhao Jianfeng, . Deformation mechanism and support technology of soft and extremely fractured coal- rock roadway with large deformation[J]. COAL SCIENCE AND TECHNOLOGY, 2016, (12).
    [5]Xiao Tongqiang Li Huamin Tu Xingzi Guo Chunsheng Li Haiyang, . Study on five-in-one rapid excavation technology of rock roadway with fully-mechanized method[J]. COAL SCIENCE AND TECHNOLOGY, 2016, (12).
    [6]Feng Yuexin Yin Qian xu Guoan, . Stability control technology of soft rock chamber with large cross section[J]. COAL SCIENCE AND TECHNOLOGY, 2016, (1).
    [7]LOU Jin-fu. Research on separation and deformation feature and supporting technology of dynamic- pressure entry[J]. COAL SCIENCE AND TECHNOLOGY, 2015, (4).
    [8]YU Wei-jian YUAN Yue WANG Weijun, . Deformation mechanism of roadway surrounding rock with large deformation and control technology under difficult conditions[J]. COAL SCIENCE AND TECHNOLOGY, 2015, (1).
    [9]SHAO Shui-cai HUANG Qing-xiang ZHANG Qiang-feng MA Kuang-sheng ZHAO Meng-ye, . Study on Outward Sliding Mechanism of Roadway in Mudstone Interlayers Coal Seam and Support Method[J]. COAL SCIENCE AND TECHNOLOGY, 2014, (11).
    [10]Support Technology of Mining Gateway with Large Section Thin Bedded Roof[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (7).

Catalog

    Article views (71) PDF downloads (37) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return