高级检索

超长工作面顶板分区破断机制及强矿压控制研究

Study on roof zonal fracture mechanism and strong ground pressure control in ultra-long working faces

  • 摘要: 超长综采工作面是煤层高效智能化开采的主要发展方向,但工作面尺度大幅增大后,顶板覆岩结构、边界约束条件及采动应力演化特征发生显著改变,普遍存在顶板破断规律复杂、矿压显现分区差异显著、局部强矿压频发等技术难题,制约着超长工作面安全高效开采。针对超长工作面顶板分区破断及矿压显现规律复杂问题,以小保当煤矿132205超长工作面为工程背景,基于矿压监测、地质雷达探测及理论分析等方法,系统研究了超长工作面顶板破断模式及分区演化规律。结果表明:受非对称边界条件及尺度效应的共同影响,支架阻力沿倾向呈现出“中间小、两边大”的多峰值分布特征;超长工作面顶板破断具有显著的空间分区性,可划分为煤柱支承区、中部过渡区及采空区影响区,各区域矿压显现表现出明显的差异性,应力峰值差异达15%~20%,来压步距差异达30%~40%;基于Kirchhoff薄板理论建立了不同边界条件下顶板力学模型,得到了顶板极限承载能力与工作面倾向长度呈平方反比关系;构建了顶板分区破断模型,给出了顶板分区破断判据,揭示了破断过程由采空区侧向实体煤侧转移的动态迁移机制;提出了超长工作面顶板区域化控制方法,现场应用表明支架高载事件显著降低,围岩稳定性得到明显改善。研究成果揭示了超长工作面顶板分区破断的力学本质,为类似条件下工作面的围岩控制提供了理论依据及工程参考。

     

    Abstract: Super-long fully mechanized working faces represent a dominant developmental direction for high-efficiency and intelligent coal mining. Nevertheless, the substantial enlargement of working face dimensions induces pronounced variations in roof overburden structures, boundary constraint conditions, and mining-induced stress evolution. Prevailing technical challenges, including intricate roof fracture mechanisms, distinct zonal heterogeneity in mine pressure responses, and frequent local intense mine pressure events, severely constrain the safe and high-efficiency exploitation of super-long working faces. To address the complex mechanisms governing roof zonal fracture and strata pressure behavior in super-long working faces, this paper takes the 132205 super-long working face at Xiaobaodang Coal Mine as a case study. Using integrated mine pressure monitoring, ground-penetrating radar (GPR) detection, and theoretical analysis, the roof fracture modes and spatiotemporal zoning evolution characteristics are systematically investigated. The results show that: Under the coupled effects of asymmetric boundary conditions and scale effects, support resistance exhibits a distinct multi-peak distribution along the dip direction, characterized by lower values in the central zone and higher values near the two ribs. Roof fracture in the super-long working face displays pronounced spatial zonation and can be divided into three distinct domains: the coal pillar supported zone, the central transition zone, and the goaf-affected zone. Strata behavior varies significantly among these zones, with stress peak differences of 15%–20% and first weighting interval differences of 30%–40%. A mechanical roof model under varied boundary conditions is established based on Kirchhoff’s thin plate theory, revealing that the ultimate bearing capacity of the roof is inversely proportional to the square of the working face dip length. A roof zonal fracture model is constructed, and corresponding fracture criteria are proposed. The dynamic migration mechanism whereby fracture initiation propagates from the goaf side toward the solid coal rib is elucidated. A regionalized roof control strategy for super-long working faces is proposed. Field applications demonstrate that high-load events on supports are significantly mitigated, and the overall stability of the surrounding rock is substantially enhanced. The findings have revealed the fundamental mechanical mechanisms underlying roof zonal fracture in super-long working faces, providing a theoretical foundation and engineering reference for surrounding rock control in similar geological and mining conditions

     

/

返回文章
返回