高级检索

钻井法凿井气举反循环洗井流场的压力分布及流体运移规律

Pressure distribution and fluid migration law of gas lift reverse circulation well washing flow field in drilling sinking

  • 摘要: 为了揭示钻井法凿井气举反循环洗井流场的压力分布及流体运移规律,以陶忽图煤矿北风井ø5 m超前钻井为研究背景,基于流体力学相关理论,建立了气举反循环洗井流场的压力数学模型,并给出了钻杆环空、井底和钻杆内部流体压力的理论解析解,其次,采用CFD-DEM方法(计算流体力学与离散单元法耦合),建立了气举反循环多相耦合洗井的数值模型,验证了洗井流场压力模型的正确性,获取了洗井流场流体的运移规律,最后,基于洗井流场的压力数学模型及理论解析解,探究了含气率、泥浆密度、泥浆黏度、岩渣密度和含渣率等因素对洗井流场压力的影响规律。结果表明:截锥型钻头水平井底流体的平均径向流速>切向流速>轴向流速;岩渣在井底做“螺旋状下滑—井底积聚—推动和悬浮—吸附和举升”的动态循环运移,在钻杆内液固及液固气段分别以“低流速,高密度”和“高流速,低密度”形式运移。钻杆内流体压力沿井口方向近似呈线性降低趋势,在注气端处,流体压力骤降,钻杆内外压差达到最大;井底流体压力自外向内呈“先小幅降低,后大幅降低”趋势,在井底有效吸附区流体压力降低幅度及速率更大。含气率、泥浆密度与钻杆内外流体压差呈正相关关系,泥浆黏度、岩渣密度、液固及液固气段含渣率则与之呈负相关关系,各因素对钻杆内外流体压差的敏感性可归结为:泥浆密度>含气率>岩渣密度>泥浆黏度>液固段含渣率>液固气段含渣率。研究可为破解侏罗系地层钻井法凿井气举反循环洗井效率低下技术难题,提供有益理论参考。

     

    Abstract: In order to reveal the pressure distribution and fluid migration law of the gas lift reverse circulation washing flow field in drilling method, the ø5m advanced drilling of the north wind well in Taohutu coal mine was taken as the research background. Based on the relevant theories of fluid mechanics, a pressure mathematical model of the gas lift reverse circulation washing flow field was established, and the theoretical analytical solutions of the fluid pressure in the drill pipe annulus, bottom hole and inside the drill pipe were given. Secondly, the CFD-DEM method (coupling computational fluid dynamics and discrete element method) was used to establish a numerical model of gas lift reverse circulation multiphase coupling well cleaning, verifying the correctness of the pressure model of the well cleaning flow field and obtaining the migration law of the fluid in the well cleaning flow field. Finally, based on the pressure mathematical model and theoretical analytical solution of the well cleaning flow field, the influence of factors such as gas content, mud density, mud viscosity, rock slag density, and slag content on the pressure of the well cleaning flow field was explored. The results indicate that: The average radial flow velocity of the horizontal bottom hole fluid of the truncated cone drill bit is greater than the tangential flow velocity and the axial flow velocity; Rock debris undergoes dynamic cyclic transport at the bottom of the well, including spiral downward movement, accumulation at the bottom of the well, propulsion and suspension, adsorption and lifting. It is transported in the form of “low flow rate, high density” and “high flow rate, low density” in the liquid-solid and liquid-solid gas sections inside the drill pipe, respectively. The fluid pressure inside the drill pipe decreases approximately linearly along the wellhead direction. At the gas injection end, the fluid pressure drops sharply, and the pressure difference inside and outside the drill pipe reaches its maximum; The fluid pressure at the bottom of the well shows a trend of “first slightly decreasing, then significantly decreasing” from the outside to the inside, with a greater decrease in fluid pressure and rate in the effective adsorption zone at the bottom of the well. The gas content, mud density, and fluid pressure difference inside and outside the drill pipe are positively correlated, while mud viscosity, rock slag density, liquid-solid and liquid-solid gas section slag content are negatively correlated. The sensitivity of various factors to the fluid pressure difference inside and outside the drill pipe can be summarized as follows: mud density>gas content>rock slag density>mud viscosity>liquid-solid section slag content>liquid-solid gas section slag content. The research results can provide useful theoretical references for solving the technical problem of low efficiency of gas lift reverse circulation well washing in Jurassic strata drilling method.

     

/

返回文章
返回